Products
Remediaton Products
PrintF.A.P. Plus™ ‘ZW’ Pump and Skimmer System
Application
Active product skimming and recovery system
Features and Specifications
- Recovers a wide range of product types through 50mm or larger wells and trenches. Depths up to 60 meters.
- Zero Water Shut Off (“ZW”) is a unique feature preventing entry of water to storage tanks by stopping the pump automatically when water level rises to the upper limit of the skimmer travel. Restarting is automatic when the water level falls below the upper limit of skimmer travel.
- Adjustable cycling frequency - optional. Range from a cycle per 5 seconds to a cycle per 2 minutes.
- Tank-Full Shut-Off device (optional) all pneumatic. Shuts off air supply to pumps when product storage vessel fills.
- Easy & accurate skimmer installation and height adjustment – without the need for an interface probe
- Product inlets (hydrophobic element and bypass element) are positioned within the product by a density float that travels in a range of 0.95m with changes in the standing water level.
- Standard hydrophobic element handles all common fuels including ULP and un-degraded diesel. Alternative skimmers are available for higher viscosity product such as oils.
- Pumping capacity up to 45 LPH in bypass mode for ULP or similar viscosity. Well recharge is always the primary limiting factor for product recovery rate.
- Air pressure range: 420 – 700 kPa (60 - 100 psi)
- Air consumption at 420kPa: 0.05 – 0.9 Nm3/hour
- Air consumption at 700kPa: 0.7 - 1.5 Nm3/hour
- Pump suction up to -58 kPa (17” Hg)
User’s Advantage
- ‘ZW’, when installed correctly, means no water in product storage tank!
- Pump can operate dry. Pump can be coiled at surface or in the well vault allowing operation where product-water interface is very shallow. Pump can also be connected to the skimmer with a flexible line and positioned at a distance from the well head
- Pump can operate dry without any detrimental effects
- Quick and precise positioning of skimmer intake without needing an interface probe!
- Simple design. Reliable and robust in field conditions
Ordering Information
| Item No. | Description |
|---|---|
| TR-51640 | F.A.P. PLUS™ PUMP ‘ZW’ (pump & filter regulator) |
| TR-51639 | F.A.P. PLUS™ PUMP ‘ZW’ (pump & filter regulator) w/ adjustable cycling |
| TR-517 | Skimmer Assembly Standard, 950mm Travel, minimum 610mm water column below product |
| TR-51711 | Skimmer Assembly Short, 550mm Travel, minimum 550mm water column below product |
| TR-762, 4, 6, 8 | Clinchers for well diameters: 2″, 4″, 6″, 8″ |
| TR-75713 | Tank-Full Shut-Off device (for up to 6 pumps) |
| Other Requirements | Hoses / Tubing / Cable/ Compressed Air Supply |
